RRC2 by Missile Works

Der RRC2 Altimeter wird von Missile Works hergestellt.

Spezifikationen:

• 0 - 25000 Ft. MSL altitude range
• Operation based on the U.S. Standard Atmosphere (1976)*
• 2 independent recovery stages with 1.25 amp FET outputs / capacitive discharge
• Stage 1 fires at apogee / Stage 2 fires at 1000' / 800' / 500' / 300' AGL (switch selectable)
• Standard 2 stage apogee/AGL recovery or redundant apogee deployment (switch selectable)
• User programmable mach flight inhibit timer (switch selectable at 4 / 8 / 12 seconds)
• Audibly reported peak altitude typically within 3% AGL span (MSL standardized - uncompensated)
• Each unit characterized and calibrated in a 1/2% barometric chamber
• New "in-situ" embedded calibration procedure for improved accuracy
• Audible ejection charge continuity verification with 80 µa sample current
• Auto compensating lift off detection that's immune to normal temp or barometric variation
• Barometric sensor test with live zero and audible alert
• Full input and output test mode to pre-test on the ground before you commit to flight
• Improved apogee integration and deadband processing
• Operational status LED indicator
• Power up audible annunciation of all DIP switch settings
• Super positive on board 9V battery retention hardware
• Engineered for a perfect fit into a 38mm coupler tube
• Dimensions - 3.7 cm wide x 14.5 cm long)
• Weight - 50 gr w/o battery, 96 gr typical

Preis: USD 90.-

Andere Version: RRC²X, 40K Fuss Höhe, Terminals für externe Batterie, erweiterte Mach- und Deployment-Zeiten, 4

• External battery terminals (8-12VDC) for additional mounting options and "X"treme conditions
• 40K MSL unit has extended mach lockouts and main deployment ranges
• Includes our BH-9 battery holder for rigid external 9V battery mount
• Mounts with (4) #4-40 screws for robust anchoring